Liquid Silicone Mold Manufacturing
Liquid Silicone Overmolding on Glass Mold
Liquid Silicone Overmolding on Glass Mold
Liquid Silicone Overmolding on Glass Mold
Liquid Silicone Overmolding on Glass Mold
Liquid Silicone Overmolding on Glass Mold
Liquid Silicone Overmolding on Glass Mold

Liquid Silicone Overmolding on Glass Mold

Liquid silicone over glass molds: glass insert fixing, clear mark-free encapsulation and optical surface protection, solving bubbles

Liquid Silicone Over Glass

Precision encapsulation of LSR over glass is used for camera windows, AR/VR optics and medical ultrasound windows. The difficulties: glass is fragile, the optical surface must not be scratched, and bubbles and stress marks must be avoided.

Mold Design Highlights

  • Glass insert fixing: flexible locating plus vacuum suction to hold the glass and avoid clamping stress and chipping;
  • Mirror cavity: polish the area opposite the optical active surface to mirror level to protect the glass finish;
  • Mark-free parting: keep the parting line away from the optical active area, in a non-visible or hidden position;
  • Low-stress filling: balanced, slow gating to reduce weld lines and optical distortion from internal stress;
  • Venting: vent fully at ends and high points or use vacuum to eliminate bubbles in the encapsulation layer.

Process Recommendation

Mold temperature 170~195C; control filling speed and holding pressure; over-curing can slightly yellow the silicone and reduce transmission. Use transmittance and haze as outgoing criteria.

Common Defects

  • Bubbles in the layer: insufficient venting;
  • Optical distortion: internal stress or flow marks;
  • Glass chipping: improper locating or ejection stress.

Delivery

Structure design, insert locating solution and trial validation of glass overmolding molds, with optical and air-tightness testing advice.

Recommended Products