Liquid Silicone Mold Manufacturing
LED Beauty Mask Silicone Mold
LED Beauty Mask Silicone Mold
LED Beauty Mask Silicone Mold
LED Beauty Mask Silicone Mold

LED Beauty Mask Silicone Mold

LED beauty mask silicone molds: light-transmitting silicone parts molding with insert and wiring clearance

LED Beauty Mask Silicone Mold

The silicone part of an LED beauty mask must transmit light evenly while enclosing the LED board and clearing wiring, a typical light-transmitting plus insert composite part. The mold focus is light-transmitting surface molding, insert clearance and wearing fit.

Design Highlights

  • Light-transmitting silicone: use light-transmitting grade LSR; polish the optical cavity surface to control haze and flow marks;
  • Insert clearance: locate the LED board and flexible circuits in the mold and add dam or clearance structures to avoid crushing components;
  • Low-stress filling: slow balanced gating so weld lines do not appear in the light-emitting area;
  • Venting: vent fully at the light-emitting area and corners to eliminate bubbles;
  • Shape fit: conformal parting on the curve for wearing comfort.

Process

Mold temperature 170~195C; over-curing yellows light-transmitting parts, so control the cure window. Use light uniformity, appearance and assembly fit as criteria.

Common Defects

  • Uneven light: flow marks or wall-thickness variation;
  • Component crushing or exposed wiring: insufficient clearance;
  • Yellowing: over-curing.

Delivery

Design, insert locating solution and trial validation of beauty mask silicone molds.

Recommended Products